Viewer

Table of Contents

Make sure you choose the correct software version by selecting the Brainlab logo in the bottom corner of the corresponding software

Thickness



The Thickness function is only available for original slices if the following conditions are met:

  • The slice distance is the same over the whole image set
  • The maximum slice distance is 2 mm
  • The maximum difference between slice distance and slice thickness does not exceed 10%
No.

Explanation

Slider bar for adjusting slice thickness. The thickness range depends on the distance between slices and cannot exceed a maximum of 6 mm total thickness.

The averaged thickness is indicated in the header (in front of AVERAGE).

A box indicates the thickness of the averaged area.

Art-No. 60919-56EN

Date of publication: 2019-10-14