Viewer

Table of Contents

Make sure you choose the correct software version by selecting the Brainlab logo in the bottom corner of the corresponding software

Option 1: How to Position the Virtual Scene Using the Printed Positioning Marker

Step

1.

Place the printed positioning marker in a location suitable for multiple viewers (e.g., in the middle of a table or on the floor).

2.

Connect your device and the software.

After connecting, you see the following message through the glasses: “Use trigger to position.”

3.

Look at the marker from a short distance. When the marker is recognized by your Magic Leap device, the virtual and printed arrows will align automatically.

4.

Once the positioning marker is recognized, the 3D scene builds up in the position indicated.

Each user must perform these steps.

Art-No. 60919-56EN

Date of publication: 2019-10-14