Adaptive Hybrid Surgery Analysis

Versión de software: 1.0
Asegúrese de que selecciona la versión de software correcta. Para ello, seleccione el logotipo de Brainlab, que está situado en la esquina inferior derecha de la aplicación correspondiente.

Technical Requirements

Hardware

Recommended hardware requirements:

Hardware Requirement
Processor 2 x 6 physical cores, Intel Xeon (Ivy-Bridge microarchitecture or newer), 2.6 GHz
Memory 32 GB
Graphics Card DirectX 11 compatible workstation graphics card with at least 1 GB memory
Screen Resolution 1920 x 1200
Network Connection 1 Gbit/s
Hard Drive RAID5 volume with 1 TB disk space
Minimum hardware requirements:

Hardware Requirement
Processor 4 physical cores, Intel Xeon (Nehalem microarchitecture or newer) or Intel Core i7 (Nehalem microarchitecture or newer), 2.6 GHz
Memory 8 GB
Graphics Card DirectX 11 compatible with at least 512 MB graphics memory
Screen Resolution 1289 x 1024
Network Connection 100 Mbit/s
Hard Drive 250 GB disk space

Software

Software

Requirement

Operating System

Windows Server 2008 (64 bit), SP2

Windows 7 Ultimate (64 bit), SP1

Windows 8.1 (64 bit)

Windows 10 LTSB 2016

Windows Server 2016

For details on service pack compatibility, consult your Brainlab support specialist.

Currently supported Brainlab Platforms:

  • Planning Station 9 Premium
  • Planning Workstation 8 RT (Planning Station for RT)
  • Brainlab Server Hardware 4.0
  • Brainlab Server Hardware 5.0
Caution

Virus Scanner

If the system is connected to local area network (LAN), Brainlab recommends to install malware protection software (e.g., virus scanner) and keep the definition files up to date. Please be aware that the malware protection software settings can affect the system performance. For example, if each file accessed is monitored, patient data loading and saving might be slow. Therefore, Brainlab recommends disabling real-time scans and performing virus scans during non-clinical hours.

Updates

Updates to the Operating System (hotfixes) or third-party software should be performed outside clinical hours and in a test environment to verify correct operation of the Brainlab system. Brainlab monitors the released Windows hotfixes and will know, for some updates, if problems can be expected. Please contact Brainlab support if any problems to OS hotfixes are encountered.

You can define your own malicious software protection measures, provided a system revalidation is done afterwards. Virus scanner settings can affect the system performance (e.g., if each file accessed is monitored, patient data loading and saving might be slow).

Performance

Calculation performance may be affected by other processes on the same machine. Dose optimization is highly dependent on the CPU and to a lesser degree file I/O. If other processes use the CPU heavily or block/use the file I/O, the application performance will be negatively affected.

The calculation time is dependent on:

  • CPU (speed and number of processors)

  • File I/O (speed of the hard disk)

  • Tumor size

  • Size of organs

  • Template used. For the initial template the calculation time is under five minutes for a system meeting the minimal hardware constraints.

Backup

After system acceptance, a backup of the Adaptive Hybrid Surgery Analysis installation is created. This backup will not run on workstations other than the one to which the software is licensed.

Article No. 60919-43EN

Fecha de publicación: 2019-03-29