Adaptive Hybrid Surgery Analysis

Make sure you choose the correct software version by selecting the Brainlab logo in the bottom corner of the corresponding software

Messages

Notifications

Notification Cause

Could not find any data.

Select an image set, one tumor and risk organs and try again.

No data

No object of type tumor was found in the plan.

Go back and check the selected objects.

No tumor
The selected tumor’s volume is too small for dose calculation. Tumor too small

Could not find any risk organs.

Go back and check the selected objects.

No OARs

Could not find any image set.

Select an image set, one tumor and risk organs and try again.

No image set (e.g., only objects on the whiteboard)

Found data sets that are not registered.

Go back to the Image Fusion step and make sure all fusions are approved.

Unfused image sets

Found multiple objects with the same organ type.

Go back and check the selected objects.

Ambiguous organs

Found risk organs in different data sets.

This is currently not supported.

Go back and check the selected objects.

OARs in multiple image sets

The risk organs are not outlined on a MR. This is currently not supported.

Go back and check the selected objects.

Risk Organs not defined on an MR

Did not find the default planning template file or the file is invalid.

Check the settings.

Missing Template

Automatically determined organ type of object xxxx.

The object will be treated as xxxx.

Organ Type from Name

The object xxxx is part of the template but was not found in the plan. Go back and check the selected objects.

One missing object

Short: xxxx objects missing. Long: The following objects are part of the template but were not found in the plan: xxxx Go back and check the selected objects.

Multiple missing objects

The object xxxx is not part of the template and will thus be ignored.

One unknown object

Short: xxxx objects unknown.

Long: The following objects are not part of the template and will thus be ignored: xxxx.

Multiple unknown objects

The image set for the object xxxx was not found in the plan.

Go back and add it to the selected data.

Slice set missing for one object

Short: Image sets for xxxx objects missing.

Long: The image sets for the following objects were not found in the plan: xxxx Go back and add them to the selected data.

Slice set missing for multiple objects

An unknown error occurred while dose planning. The application is not able to continue. For details check the logfile.

Dose planning failed

A critical error occurred and the application is not able to continue. For details check the logfile.

Critical Error

An unknown error occurred while creating the outer contour. The application is not able to continue. For details check the logfile.

Outer contour calculation failed

An unknown error occurred while dose optimization. The application is not able to continue. For details check the logfile.

Dose optimization failed

An unknown error occurred while calculating the prescription. The application is not able to continue. For details check the logfile.

Prescription calculation failed

DICOM Notifications

DICOM notifications can be listed as:

  • Short: Preview text in the pop-up window

  • Single: Expanded text for a single notification

  • Long: Expanded text for multiple notifications

  • PerItem: List of individual parameters or items for “Long”

General Information

Short: xxxx xBrain data items not loaded.

Single: The xBrain data xxxx was not loaded.

Long: The following xBrain data were not loaded: xxxx

DICOM message cannot be processed by the current version of the application.
Patient Name specified in the DICOM message is too long (>64 characters). In case of DICOM export, the Patient Name will be shortened accordingly.
Alphabetic Patient Name in the DICOM message has more name components than allowed. Only the first five are imported, other components are ignored.
It is not possible to identify patient information in DICOM file as Patient’s Name and Patient ID are not defined. This file is skipped.
Patient ID specified in the DICOM message is too long (>64 characters). In case of DICOM export the Patient ID will be shortened accordingly.
DICOM Registration
Registration cannot be imported as source and target coordinate systems cannot be identified.
Registration cannot be imported as source coordinate system cannot be identified.
Registration cannot be imported as two coordinate systems are expected in the Registration object.
Registration cannot be imported as one or both of the corresponding image series (Frame of Reference) are not found.
Registration cannot be imported as one (source) of the corresponding image series (Frame of Reference) is not found.
Registration cannot be imported as one (target) of the corresponding image series (Frame of Reference) is not found.
Registration cannot be imported as the root image series cannot be identified.
Registration cannot be imported as the registration between the coordinate systems cannot be established.
Registration with a problem found (transformation matrix has an inversion issue).
Registrations found that describe a chain between image series.

Short: xxxx contradicting registrations found.

Single: Registration cannot be imported as it contradicts another registration. The image fusion between xxxx and xxxx is imported (image fusion: date, time).

Long: The following registrations cannot be imported as they contradict another registration: xxxx.

PerItem: Image fusion between xxxx and xxxx (image fusion: date, time).

Registration cannot be imported as the Transformation Matrix cannot be found in the Registration object.
Registration cannot be imported as the source and the target image series are identical.
Registration cannot be imported as either source or target coordinate system cannot be created.
Registration cannot be imported due to an internal error
Registration cannot be imported as the fusion matrix is not orthogonal.

Short: xxxx missing images instance references.

Single: The DICOM Registration object between image series xxxx, xxxx and image series xxxx, xxxx does not reference all images instances of the registered image series.

Long: The DICOM Registration objects between the following image series do not reference all images instances of the registered image series: xxxx.

PerItem: Image series xxxx , xxxx and image series xxxx, xxxx.

Short: xxxx missing image instances.

Single: The DICOM Registration object between image series xxxx, xxxx and image series xxxx, xxxx references image instances which cannot be found.

Long: The DICOM Registration objects between the following image series reference image instances which cannot be found: xxxx.

PerItem: Image series xxxx, xxxx and image series xxxx, xxxx.

Short: xxxx objects do not fulfill the IHE-RO recommendations.

Single: The DICOM Registration object between image series xxxx, xxxx and image series xxxx, xxxx does not fulfill the IHE-RO recommendations as no image instances are referenced. Therefore the imported Image Fusion may be potentially wrong.

Long: The DICOM Registration objects between the following image series do not fulfill the IHE-RO recommendations as no image instances are referenced xxxx. Therefore the imported Image Fusion may be potentially wrong.

PerItem: Image series xxxx, xxxx and image series xxxx, xxxx.

Short: xxxx objects do not fulfill the IHE-RO recommendations.

Single: The DICOM Registration object between coordinate system xxxx and coordinate system xxxx does not fulfill the IHE-RO recommendations (only the source coordinate system is stored in the registration matrix). Therefore the Image Fusion is not imported.

Long: The DICOM Registration objects between the following coordinate systems do not fulfill to IHE-RO recommendations (only the source coordinate system is stored in the registration matrix xxxx Therefore the Image Fusion is not imported.

PerItem: Coordinate system xxxx and coordinate system xxxx.

Short: xxxx objects have identical Frame of Reference UIDs.

Single: The DICOM Registration object with the coordinate system xxxx cannot be imported, as it has identical Frame of Reference UIDs for the source and the target. This is not IHE-RO conform.

Long: The DICOM Registration objects with the following coordinate systems cannot be imported, as they have identical Frame of Reference UIDs for the source and the target xxxx. This is not IHE-RO conform.

Internal error. The registration cannot be loaded. See logfile for details.
The DICOM Registration object cannot be imported as the DICOM headers of the referenced image series are missing. See logfile for details.
DICOM Segmentation

Short: xxxx contour objects have no corresponding image series.

Single: Contour object ‘ xxxx ‘ cannot be imported as the corresponding image series cannot be found.

Long: The following contour objects cannot be imported as the corresponding image series cannot be found: xxxx.

Short: xxxx missing image instances.

Single: Contour object ‘ xxxx ‘ references image instances that cannot be found.

Long: The following contour objects reference image instances that cannot be found: xxxx.

Short: xxxx contour objects with missing image instances.

Single: Contour object ‘ xxxx ‘ does not reference all image instances of the reference slice set ‘ xxxx ‘.

Long: The following contour objects do not reference all image instances of the reference slice set: xxxx.

PerItem: Contour object ‘ xxxx ‘, reference slice set ‘ xxxx. ‘

Short: xxxx contour objects with missing Frame Of Reference.

Single: Contour object ‘ xxxx ‘ cannot be imported as the Frame Of Reference cannot be found.

Long: The following contour objects cannot be imported as the Frame Of Reference cannot be found: xxxx.

Short: xxxx contour objects cannot be created.

Single: Contour object ‘ xxxx ‘ cannot be imported due to an internal error (Contour object cannot be created).

Long: The following contour objects cannot be imported due to an internal error (Contour object cannot be created): xxxx.

Short: Could not find DICOM header for xxxx contour objects.

Single: Contour object ‘ xxxx ‘ cannot be imported as the DICOM header of the corresponding image series cannot be found.

Long: The following contour objects cannot be imported as the DICOM header of the corresponding image series cannot be found: xxxx.

Article No. 60919-43EN

Date of publication: 2019-03-29